Select Page

3 & 4 POINT BEND FIXTURES

3 & 4 POINT BEND FIXTURES

OVERVIEW

Bend fixtures are typically used for applying constant stress to a sample for an extended period of time. The stress is applied by deflecting thin metal samples a specified amount using a loading apparatus. While this deflection is maintained, the fixtures are placed in a corrosive environment within a hydrogen induced cracking (HIC) tank or autoclave for the duration of a test. These bend fixtures are the same as specified in ASTM G39 and NACE TM0177 – Method B. A loading fixture can be included to simplify the deflection measurement. All Cortest fixtures are made from Hastelloy C-276 material, a superior solution to coated 316 S.S. fixtures.

TEST METHODS
NACE TM 0177
ASTM G39

 

FIXTURE DESIGNS
3 OR 4 POINT BEND

 

MATERIAL OF CONSTRUCTION
HASTELLOY C-276

(No Coatings to Scratch Off)

3 & 4 POINT BEND FIXTURES

TYPICAL APPLICATIONS

-Constant Load Testing NACE TM 0177 Method B

Four-Point Bend Testing of Materials for Oil and Gas Applications – NACE TM0316

-Long/Short Term Environmental Exposure Testing

-Microbiologically Influenced Corrosion (MIC) Studies

-Stress Corrosion Testng of Alloys – ASTM G39

-Hydrogen Induced Cracking (HIC) Test Tanks

3 & 4 POINT BEND FIXTURES

CATEGORIES

NEED SOMETHING LIKE THIS?

WE CAN BUILD IT






CORTEST Headquarters   |   38322 Apollo Pkwy, Willoughby, Ohio 44094, USA   |   P: 440.942.1235   |   F: 440.942.0327   |   corrosion@cortest.com

©2017 CORTEST and all work represented. All rights reserved.

CORTEST Headquarters

38322 Apollo Pkwy, Willoughby, OH 44094, USA

P: 440.942.1235   |   F: 440.942.0327

corrosion@cortest.com

©2017 CORTEST and all work represented. All rights reserved.

Search
Exact matches only
Search in title
Search in content
Search in comments
Search in excerpt
Filter by Custom Post Type